My Garage Door is Making a “Funny Noise” – What it Means

Before you call for a Weston garage door repair company there are a few things that you might want to check into. Let’s face it, while garage doors are pretty amazing pieces of technology, they most definitely do have their shortcomings, and the most common question regarding them goes something like this: “Why is my garage door making that noise?”. It would be easier to actually hear the noise, but in all honesty there are a few major culprits that must be explored, and we’re going to start with some of the most obvious.

Tighten the Track Hardware

The ‘funny’ noise might be a rattling, and if that is the case here, then you can start by tightening the track hardware. You will want to use a deep socket and ratchet on all of the nuts and make sure that they are snug. Do be careful not to over tighten however, as this can pull the carriage bolt heads through the door and strip the screw holes. In other words, if you over tighten, there is a good chance that you will end up with a much more expensive repair job than you originally intended.

Do you Have Worn Rollers?

After you’ve tightened everything, you might as well take the extra step of examining the rollers and hinges. Quite a few rollers out there have unsealed bearings that seem designed to die after a few years, especially if the garage area is dirty. If your rollers are in fact worn, then they will be making a lot of noise, and you should really think about replacing them with rollers that have sealed bearings. If you want to go the extra mile, try nylon rollers which are quieter and don’t call for constant or periodic oiling. Just remember that they cost a bit more than the typical steel rollers.

What About Worn Hinges?

The chances that you have worn hinges rather than worn rollers are slim to none, but we strongly recommend checking it out anyway. Hinges in disrepair can make quite a bit of noise and may cause your door to bind and wear out. The hinge needs some play in order to work, but if you see too much space, replace that hinge. Also remember that gay dust and metal filings are a sign of hinge wear, so don’t be afraid to err on the side of caution.

Check the Chain

Your door opener chain could very well the culprit and the cause of the noise, so keep that in mind as you are investigating. A loose chain will make a loud slapping noise, and it can contribute to jerky movements as the door moves. This causes the door to smack against the rollers, basically causing nearly every single red flag you could imagine. You can tighten the chain using the procedure found in your owner’s manual, and once you do this, you will need to lubricate the opener track.

Basic Upkeep

If you want to keep your garage door in working condition for the foreseeable future, then there is nothing wrong with doing some basic upkeep. Make sure that the track stays lubricated and checking periodically on all of the moving parts will go a long way toward helping you to keep your garage door in working order.

Remember, if all else fails, there is absolutely nothing wrong with seeking out the help of a garage door repair company in Weston. It doesn’t have to be terribly expensive, and it will certainly help to prevent damage further down the line. One of the biggest mistakes that people make is allowing their garage door damage to go unchecked, thereby leading to serious complications.

Remember, while you might just think it’s a garage right now, but after a few years of wear and tear, it will become a burden. A good garage door repair expert can help to take the burden off your shoulders and make sure that your garage door is in great shape for the foreseeable future.