Call: (954) 830-9661
Garage doors are important pieces of machinery, but today we’re going to be taking a closer look at the torsion springs. When it comes to garage door repair in Tamarac the torsion springs are one of the most important components and are responsible for providing the “muscle” so to speak behind how your garage door works.
How Torsion Springs Work
Tamarac garage door repair is important to us and we can’t stress enough to never attempt a repair on your own if you don’t know what you’re doing. Torsion springs are highly specialized and can cause injury if they’re mishandled in anyway shape or form.
Standard torsion springs use what’s called a stationary cone and a spring anchor bracket, the bracket is kept flush and secure to the wall so it doesn’t shift when put under stress. On the other end of the torsion springs is what’s called a winding cone and is the main part where any uninstalling, adjusting, or installing is done for the springs. As the name suggests, the coils of the torsion springs when they’re wound up to create “torque”; this is a twisting force that causes rotation.
This torque is applied to a metal tube referred to as the shaft that goes through the spring and each end is held by end bearing plates. Cable drums rest against these bearings and the cables are wrapped tightly around these and reach all the way to the bottom of the garage door. A bracket holds the cable in place and together this pulley system is able to easily lift the garage door.
How Important Are Torsion Springs for Tamarac Garage Door Repair?
In a nutshell, it can be said the torsion springs are responsible for most of the mobility your garage door has when it’s lifting and closing. The torque from the springs being used is so strong that it allows you to manually open your garage door since the lift makes the door feel lighter then it should. The torsion springs are doing the majority of the work and allow your garage door to lift automatically when using a door opener. When it comes to garage door repair Tamarac they’re one of the most important components that are responsible for its operation.
How Do Torsion Springs Wear Out?
The garage door repair services in Tamarac are focused on bringing you the best service possible and one of the questions we’re asked frequently is how long people can expect their torsion springs to last. This depends on the lifecycle of your torsion springs and how many cycles they can last, a cycle being when a garage door opens and closes. When it opens and then closes, this is called a “cycle” and most garage doors can last through about ten to fifteen years on average if they only go through one or two cycles a day. Double that number and you halve the lifespan of the garage door and in return the torsion springs.
Over time torsion springs can start to unwind and this causes them to have less torque so their ability to lift the door degrades. You can usually tell the torsion springs are starting to wear down by how the garage door lifts and whether it’s starting to have a hard time to go up and down. When it starts screeching this can be an indicator the springs are towards the end of their lifecycle and it could mean you’ll need them replaced soon.
Our Tamarac garage door repair services are unmatched in this area and we understand how important it is to maintain these aspects of your garage door. They’re considered one of the most important components of the garage door and maintaining them is incredibly important to the operation of the door. Feel free to give us a call if you suspect there’s a problem with your torsion springs and we’ll be with you as soon as possible.
Leave A Comment
You must be logged in to post a comment.